Skip to content
+90 (000) 000 00 00
Natsu Makina

VMP-A Plug & Play Below-the-Hook Vacuum Lifters

Vakumer Plug & Play VMP-A / VMP-H

Below-the-hook vacuum lifters for heavy loads, powered by AC, DC or air, are designed to lift and carry large sheet-shaped materials (marble, granite, sheet metal, PVC, GRP, etc.) by vacuum. Used by attaching them to overhead cranes, forklift forks or jib crane hooks, these plug-and-play below-the-hook vacuum devices can carry loads upright and, optionally, tilt by 90 degrees, rotate by 90 degrees or turn over by 180 degrees. These additional movements can be manual, linear-actuator driven or hydraulic. On VMP-A models the vacuum pump and electric cylinder (actuator) are on the machine; on VMP-H models tilting is done by a hydraulic cylinder. An electrical supply is all that is needed; no installation or assembly is required. An audible and visual warning system is triggered on vacuum loss. A special VMB-H model with a two-stage blower is also built for porous stones such as travertine.

Vakumer Plug & Play VMP-A / VMP-H

Product information

Application and technical details.

Features and options

  • Use on overhead cranes, bridge cranes, jib cranes or forklift forks
  • Optional 90° tilting, 90° or 180° turning
  • Manual, linear-actuator or hydraulic tilting
  • Vacuum pump on the machine
  • Height-compensating pads adjustable in both directions
  • Audible and visual warning on vacuum loss
  • Electrical connection only; no installation needed
  • VMB-H for travertine (two-stage blower)

Technical values are confirmed at the quotation stage.

  • Vakumer Plug & Play VMP-A / VMP-H
  • Vakumer Plug & Play VMP-A / VMP-H
  • Vakumer Plug & Play VMP-A / VMP-H
  • Vakumer Plug & Play VMP-A / VMP-H